Radio Setup

• Make sure you are running OpenTx >= 2.2
• Download the latest PixPilot and place the SCRIPT in the root of your radio SD card.
• Turn on your radio and your flight controller.
• On your model screen, press MENU and then press PAGE until you are on the CUSTOMS SCRIPTS page.
• Select the first available free spot and assign the script specific to your flight controller. E.g. for PX4 select PixP4.
• Now press PAGE once more to get to the Telemetry page.
• Press - until Delete all sensors is highlighted and long press Enter and Enter once again to confirm.
• Now go one up twice with + and select Discover new sensors.
• If everything is set up correctly, you should get a lot of new sensors! If nothing happens, make sure all connections to the receiver are good and that your flight controller is actually sending telemetry data.
• Now stop the sensor discovery and down to Screen 1, select Script and select your desired PixPilot screen (e.g. PixMav for Mavlink Messages)
• Go back to your model screen and long press Page. Your desired PixPilot screen should now show! If there has been any errors, it will tell you so.
• Enjoy and happy flying!